How to minimize the damage when processing aluminum fabrication parts at http://www.baichaosheetmetal.com/
1. The selection of hardware models, specifications, and functions for aluminum fabrication processing must comply with national standards and regulations and match the
selection of PVC windows and doors.
2. Install the fastening screws that must be set in the metal lining, and the lining thickness is more than twice the hardware inside the fasteners.
3. Metal stampings are installed to prevent rust and corrosion after regular maintenance.
4. In the window frame door door lock handle assembly. To ensure correct, switch to a flexible location.
5. The sliding window is a double pulley than a one meter wide or double glass door and window.
6. The sliding hinge is made of stainless steel.
7. The warning light turns off during use.
Selection of aluminum fabrication processing materials
The commonly used materials for aluminum fabrication processing are hot and cold rolled sheet (SPCC) and hot plate (SHCC) and galvanized sheet (galvanized steel sheet and
State Grid Corporation), copper (copper) brass, copper and copper matte, and aluminum sheet ( 6061, 6063, and hard aluminum), aluminum profiles, steel and stainless steel
(mirrors, and drawing drawings and matte), depending on the role of the product, the choice of materials, generally need to consider from the product and its use and cost
.
1. With cold-rolled steel sheet SPCC, the main plating and paint, low cost, easy to shape, material thickness ≤ 3.2 mm.
2. Strip small town, t ≥ 3.0mm material, electroplating, painting, low cost, but mainly with metal plates.
3. Galvanized steel galvanized sheet, State Grid Corporation of China. SECC electrolysis plates n, p, and n are mainly free of surface treatment materials, costly, and p
sprayed.
4. The copper-based conductive material is mainly for the bunker and its surface is nickel-plated, chrome-plated, or no special treatment, and the cost is very high.
5. Aluminum general surface chromate (J11 A) and oxidation (conductive oxidation, chemical oxidation), higher cost, silver plating, nickel plating.
6. Aluminium Profiles For complex materials, widely used in a variety of plugs in the box. Surface treatment with aluminum plate.
7. Stainless steel, used mainly without any surface treatment and high cost.
1. The selection of hardware models, specifications, and functions for aluminum fabrication processing must comply with national standards and regulations and match the
selection of PVC windows and doors.
2. Install the fastening screws that must be set in the metal lining, and the lining thickness is more than twice the hardware inside the fasteners.
3. Metal stampings are installed to prevent rust and corrosion after regular maintenance.
4. In the window frame door door lock handle assembly. To ensure correct, switch to a flexible location.
5. The sliding window is a double pulley than a one meter wide or double glass door and window.
6. The sliding hinge is made of stainless steel.
7. The warning light turns off during use.
Selection of aluminum fabrication processing materials
The commonly used materials for aluminum fabrication processing are hot and cold rolled sheet (SPCC) and hot plate (SHCC) and galvanized sheet (galvanized steel sheet and
State Grid Corporation), copper (copper) brass, copper and copper matte, and aluminum sheet ( 6061, 6063, and hard aluminum), aluminum profiles, steel and stainless steel
(mirrors, and drawing drawings and matte), depending on the role of the product, the choice of materials, generally need to consider from the product and its use and cost
.
1. With cold-rolled steel sheet SPCC, the main plating and paint, low cost, easy to shape, material thickness ≤ 3.2 mm.
2. Strip small town, t ≥ 3.0mm material, electroplating, painting, low cost, but mainly with metal plates.
3. Galvanized steel galvanized sheet, State Grid Corporation of China. SECC electrolysis plates n, p, and n are mainly free of surface treatment materials, costly, and p
sprayed.
4. The copper-based conductive material is mainly for the bunker and its surface is nickel-plated, chrome-plated, or no special treatment, and the cost is very high.
5. Aluminum general surface chromate (J11 A) and oxidation (conductive oxidation, chemical oxidation), higher cost, silver plating, nickel plating.
6. Aluminium Profiles For complex materials, widely used in a variety of plugs in the box. Surface treatment with aluminum plate.
7. Stainless steel, used mainly without any surface treatment and high cost.
コメント